Product Description
A wooden radius block for controlled fingerboard sanding and fretboard preparation in guitar and bass workshops.
Key features
- Selected supplier option: 10-inch radius
- Material: wood
- Overall size: approximately 130 × 68 × 40 mm
- Single-radius curved sanding face
- For abrasive paper and manual sanding
Compatibility and fitting
Use only where a 10-inch fingerboard radius is required. Verify the instrument specification before removing material; professional luthier technique is recommended.
Package contents
1 × wooden 10-inch radius sanding block.
Important: Check all measurements and compatibility against your instrument before ordering. Professional installation is recommended for wired components.
