Guitar & Bass Care

Five-Grit Guitar Fret Polishing Eraser Set with Case

Work through five abrasive grades when cleaning and polishing metal guitar or bass frets. The compact rubber blocks offer a hand-held alternative for controlled finishing work.Five grades: 180, 400,...

Guitar Nut and Saddle Height Scribe with Refill

Mark a reference line on a guitar nut or saddle before shaping and slotting. The adjustable scribe helps keep the marking height consistent during workshop setup.Aluminium alloy body with brass...

GIYO Adjustable Brass Guitar Nut – 42 mm

Adjust nut height on a compatible six-string electric guitar using the fitted screws.Brass nut with six string grooves and a separate base plate.Approx. nut dimensions: 42 × 3.5 × 5 mm; outer-string...

Floating Tremolo Bridge Support Shim – Black

Support a compatible floating tremolo bridge while changing strings or carrying out setup work.Removable black ABS support with angled edges.Slides beneath a raised bridge to hold its position during...

Dual-Action Guitar Truss Rod with Hex Key – 420 mm

A two-way truss rod for a compatible guitar neck build or replacement project.Metal rod with a blue covering.Selected length: 420 mm.Includes one dual-action rod and one hex key.Fit and use: This is...

Guitar Tuner Pin Drilling Jig Kit – 10 mm

Locate mounting-pin holes when fitting compatible guitar tuners.Aluminium jig for headstock tuner bores designed around a 10 mm opening.Includes the jig, a clamping knob and two drill bits with...

Guitar Fret Slotting Saw with Adjustable Depth Guide

Cut or clean fret slots with a hand saw fitted with an adjustable guide plate.Fine-tooth metal blade with a dark wooden handle.Guide plate adjusts using two knobs to limit cutting depth.Includes one...

GETMUSIC 7-String Fan-Fret Humbucker Pickup Pair

A neck-and-bridge humbucker pair for compatible seven-string fan-fret guitar builds.Ceramic bar magnets with adjustable hex-screw pole pieces.Listed pole spacing: neck 58 mm; bridge 62 mm.Black ABS...

5-Degree Guitar Bridge Pin Hole Reamer – T Handle

Hand-ream compatible guitar bridge-pin or end-pin holes to a tapered profile.5-degree taper with six flutes.Working taper specified as 1/8–1/2 inch, approximately 3.2–12.7 mm.Steel tool with a...